Monday, July 22, 2013

Biostar TH61U3+ Ver. 6.x ITE CIR Driver 5.1.000.7 for Windows 8

Specifications:

Chipset:
- Intel H61

CPU SUPPORT:
- Intel Core i7 LGA 1155 Processor
- Intel Core i5 LGA 1155 Processor
- Intel Core i3 LGA 1155 Processor
- Intel Pentium LGA 1155 Processor
- Maximum CPU TDP (Thermal Design Power) : 95Watt

MEMORY:
- Support Dual Channel DDR3 1600/1333/1066 MHz
- 2 x DDR3 DIMM Memory Slot
- Max. Supports up to 16GB Memory

EXPANSION SLOT:
- 1 x PCI-E x16 3.0 Slot (supported by Core i5 -3xxx / Core i7 3xxx CPU)
- 1 x PCI-E x16 2.0 Slot (x1)
- 1 x PCI-E x1 2.0 Slot
- 1 x PCI Slots

STORAGE:
- 4 x SATA2 Connector

USB:
- NEC uPD720200 USB 3.0 controller
- 2 x USB 3.0 Port
- 2 x USB 2.0 Port
- 2 x USB 2.0 Header

LAN:
- Realtek RTL8111E - 10/100/1000 Controller

INTEGRATED VIDEO:
- By CPU model

CODEC:
- Realtek ALC892 6-Channel Blu-ray Audio

REAR I/O:
- 1 x PS/2 Keyboard
- 2 x USB 3.0 Port
- 2 x USB 2.0 Port
- 1 x HDMI Connector
- 1 x DVI Connector
- 1 x VGA Port
- 1 x RJ-45 Port
- 3 x Audio Connector

INTERNAL I/O:
- 2 x USB 2.0 Header
- 4 x SATA2 3Gb/s Connector
- 1 x Front Audio Header
- 1 x Front Panel Header
- 1 x S/PDIF-OUT Header
- 1 x CPU FAN Header
- 2 x System FAN Header
- 1 x Serial Header
- 1 x CIR Header

FEATURES:
- Supports BIO-Remote 2
- Supports BIO-Remote
- Supports 100% Solid capacitor
- Supports Charger Booster
- Supports BIOS Online Update

It is highly recommended to always use the most recent driver version available.

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Source: http://drivers.softpedia.com/get/MOTHERBOARD/ITE/Biostar-TH61U3plus-Ver-6x-ITE-CIR-Driver-510007-for-Windows-8.shtml

indonesia quake stephen strasburg shabazz legion baby found alive in morgue rockies second degree murders

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.